Verifying a form 16: a reviewer's guide to forgery and tampering
Form 16 is the TDS certificate an Indian employer issues after each financial year, stating the salary paid and the tax deducted at source, built in two parts: Part A generated through the TRACES portal and Part B prepared by the employer with the salary breakup and deductions. It underpins Indian loan, visa, and refund files, and the profitable fraud is simple: inflate the TDS figure so the refund claimed grows with it.
Last updated:
- Most edited
- gross and net salary rows
- deductor TAN and PAN
- TDS quarterly totals
- assessment year
- Reviewed by
- Indian lenders, visa consultants, and tenant verification desks
Forgery methods seen on a form 16
Method
How it works and what it leaves behind
- Part A against Part B
- Total salary and total tax deducted must agree across both parts. A Part B whose TDS exceeds Part A's quarterly totals inflates a refund claim, and that reconciliation failure is the signature fraud on this document.
- Assessment-year arithmetic
- The assessment year is the financial year plus one on every field pair. Mismatched year labels, or quarterly figures that fail to sum to the annual row, point at retyped numbers.
- TAN and PAN structure
- Both identifiers follow fixed grammars, and a number that violates its grammar was typed rather than issued. A PAN that disagrees with the employee's other documents turns a formatting question into a composite-identity signal.
- Figure-level print forensics
- Edited amounts usually arrive as a changed font pass, realigned columns, or digit spacing that departs from the rest of a table row, because amounts are the only region a forger touches.
- TRACES layout conformance
- Part A follows the TRACES template down to the certificate number and the employer block. A Part A missing those anchors, or one that mixes formats, was assembled rather than generated.
What gets missed when a form 16 is checked by eye
Templates circulate
The same forged layout turns up across unrelated applicants. Without a way to compare new submissions with earlier ones, each looks fine in isolation.
Reviewers read the headline number
Underwriters look at salary, closing balance or total income. A forger edits exactly that line and leaves the rest of the page alone.
Arithmetic is rarely recomputed
Few reviewers add every column of a form 16 by hand. A careless edit is caught by recomputation, and a careful one needs more than arithmetic.
What looks wrong on a form 16
Gross and net salary rows that do not sit with the figures around it
The gross and net salary rows are the figure a forger most wants to change. Read it against the other amounts on the page and against any second document that should agree with it. A careless edit updates this line and leaves the rest of the file describing the original.
Deductor TAN and PAN that read right but render oddly
Zoom in on the deductor TAN and PAN and look at the background behind the characters. Edits often leave a faint halo, a patch of slightly different texture or spacing that was fine at full-page view.
Rows that sit slightly out of line
Inserted or deleted lines often leave a gap, a misaligned decimal point or a row whose spacing is a hair different from its neighbours.
Totals that were typed, not calculated
Add the columns yourself. A document produced by an accounting or payroll system reconciles to the unit, and a hand-edited one often does not.
Round numbers where systems produce messy ones
Real payroll and banking output is full of odd amounts. Suspiciously round figures across a whole document are worth a second look.
What to expect on a genuine form 16 before you test it
Part A carries the employer's TAN, the employee's PAN, the assessment year, a unique certificate number, and a quarterly table of salary paid and tax deducted on the TRACES layout. Part B itemises the salary components, exempt allowances, and deductions, and lands on totals that must equal Part A's figures rather than merely resemble them.
The assessment year always runs one ahead of the financial year, so income earned in FY 2024-25 prints on an AY 2025-26 certificate, and labels that contradict the relationship indicate a retyped form. TANs follow the same four-letter, five-digit, one-letter grammar as PANs, which gives structural validation a second anchor on the document.
A practical checklist for a form 16
1. Collect the full form
Get every page of Parts A and B as a PDF or flat scan at full resolution, since the reconciliation runs across tables on separate pages.
2. Reconcile the totals
Sum the quarterly salary and TDS rows in Part A and compare them against Part B's closing figures. Disagreement between the parts is the core fraud pattern.
3. Check years and identifiers
Confirm the assessment year is the financial year plus one, and validate the TAN and PAN structures against their grammars.
4. Run a forensic check on the file
Part-to-part reconciliation is arithmetic, but the edits that create the mismatch live in the print. TamperCheck runs 300+ forensic checks including totals recomputation and cell-level analysis, and returns a risk score from 0 to 100 with findings tied to specific regions of the image.
Form 16 fraud: your questions answered
What is the difference between Form 16 Part A and Part B?
Part A is generated by the employer through the TRACES portal and carries the deduction record, while Part B is the employer's annexure itemising salary and deductions. The two must reconcile on totals, and a Part B alone, without a coherent Part A behind it, is not a complete certificate.
Why does Form 16 show a different year than the salary year?
Indian tax labels run one year ahead: income earned in FY 2024-25 prints on an AY 2025-26 certificate. The offset is the rule, so a certificate whose year labels match each other is mislabelled or fabricated.
Can Form 16 exist if no tax was deducted?
Employers must issue Part A where tax was deducted, and many issue the form or a salary certificate even below the threshold. A Form 16 claiming heavy deductions with no employer TAN structure behind it is the combination worth questioning.
How does TamperCheck verify Form 16?
TamperCheck reconciles Part A against Part B, recomputes the quarterly and annual totals, validates the TAN and PAN grammars, and inspects the tables for figure-level edits. It runs on a single REST endpoint, processes the upload ephemerally without storing it, and returns findings tied to specific regions.
Where does a forensic review of a form 16 start?
It starts where forgeries of a form 16 most often break: the deductor's TAN and PAN, the employee's PAN, and the Part A and Part B rows. The rest of a form 16 is covered by the general pixel, font and metadata layers.
What inconsistency most often exposes a forged copy of a form 16?
Usually a disagreement between gross salary minus deductions and the taxable income stated. On a form 16 both come from one production pass, so an edit that touches one and not the other shows.
What does a generated form 16 from an online template look like?
Generator output for a form 16 is internally consistent and usually built on stock fonts and layouts. The tell is often the same form 16 template appearing across unrelated applicants, so comparing a new submission with earlier ones is often faster than inspecting it alone.
Which figures on a form 16 do forgers change first?
The ones a lender or landlord reads first, such as gross and net salary rows, deductor TAN and PAN, and TDS quarterly totals. They are edited in place on an otherwise genuine form 16, which is why the rest of the page still looks right.
Is it illegal to alter a form 16?
In most jurisdictions, yes: changing gross and net salary rows on a form 16 and submitting it to get a loan, job, visa or service is treated as forgery or fraud. Penalties vary by country. This is general information and not legal advice.
Inside the forensic analysis of a form 16
Arithmetic reconciliation
Stated totals are recomputed from their components, and running or cumulative figures are checked for continuity across periods. A single edited value breaks the chain even when the page still looks right.
Table structure integrity
Inserted and deleted rows leave structural artifacts behind: inconsistent spacing, misaligned columns, and formatting the visible table no longer accounts for.
Reference and document number checks
Document, account, and reference numbers are checked for issuer format conformance and against every other place the same value appears on the page.
And many more checks
The three above are the layers that carry the most weight on a form 16. Every upload runs the full suite of 300+ checks regardless of document class, spanning file structure and metadata, pixel-level forensics, font and text rendering, optical and print characteristics, provenance signals, AI-generation signatures, and many more checks.
Check a document
Upload a PDF or a photo of form 16. TamperCheck returns a risk score from 0 to 100 and marks the region that was edited, usually within seconds.
For developers, the API class is form_16. See the API and MCP documentation.